Available options
Choices to suit the job.
- 01Gate width and handing
- 02Oak posts and post arrangement
- 03Hinges, latches and closing hardware
- 04Finish and weathering preference
- 05Single orders, quantities and repeat supply
Gates and entrances · AWP-G01
The Surrey Field Gate
The Surrey Field Gate is Albion's traditional five-bar gate for fields, estate routes and rural entrances. It is manufactured to order in oak using mortise-and-tenon joints secured with timber dowels.
Product overview
A sound gate for a working entrance
A five-bar gate must suit more than the width of the opening. Its weight, daily use, ground levels and hanging geometry determine the sections, clearances and ironmongery required. We record these points in the quotation so the gate and its supporting components are specified together.
Suitable for
- Estate and farm entrances
- Fields, paddocks and vineyards
- Countryside and conservation sites
- Private properties requiring a substantial timber gate
Construction & details
Product and joinery details.
Related views show the form, construction and finish more clearly.
Common sizes
Useful starting points.
The sizes shown are nominal gate widths. The clear opening, hinge arrangement, posts and required clearances must be confirmed before manufacture. The published starting price is based on the 4ft gate.
- 4ft
- 1,220 mm
- 5ft
- 1,525 mm
- 6ft
- 1,830 mm
- 7ft
- 2,135 mm
- 8ft
- 2,440 mm
- 9ft
- 2,745 mm
- 10ft
- 3,050 mm
- 11ft
- 3,355 mm
- 12ft
- 3,660 mm
- 13ft
- 3,965 mm
- 14ft
- 4,270 mm
- 15ft
- 4,570 mm
- 16ft
- 4,880 mm
Product information
A clear starting point.
The details below show the usual starting point. We’ll confirm the dimensions, materials and options in your quotation.
- Product reference
- AWP-G01
- Overall dimensions
- Set from the clear opening, ground levels and required clearances
- Timber
- Oak, with species and stated origin confirmed in the quotation
- Construction
- Mortise-and-tenon joints secured with timber dowels
- Ironmongery
- Hinges, latch, stops and other components selected for the gate and its use
- Supply
- Supply only, delivery or managed installation available
- Standard sizes
- Manufactured for openings from 4ft to 16ft, generally in 1ft increments. Wider openings, paired leaves and unusual hanging arrangements are assessed and quoted individually.
- What the starting price covers
- Based on a single gate approximately 4ft (1,220 mm) wide and 900 mm high in the standard specification, supplied without posts, ironmongery, delivery or installation.
Materials & construction
Good timber, clearly stated.
British-grown oak is preferred where it is suitable, available and commercially practical. European oak may be proposed where it provides a better fit for the order. Exterior ironmongery and fixings are selected around the gate weight, exposure and expected use, and the proposed materials are stated in the quotation.
Maintenance & repair
Made for maintenance and repair.
Hinges, latches, posts, clearances and water-shedding details should be inspected periodically. Where practical, ironmongery and individual timber components can be adjusted, repaired or replaced without discarding the complete gate.